Type G 4 Conductor

Buy Now

WesBell Type G Cable is an industrial size SOOW cable or industrial size extension cord with additional small ground wires. It powers large generators and equipment on construction sites that do not yet have a permanent power supply. Type G cable is rated for 2000 volts and it has a dual layered jacket that withstands severe outdoor conditions and damage such as being run over by equipment. The cable core is bound for superior flexibility and toughness.

Type G 4 Conductor Cable Construction

The copper strands in Type G cables are bare copper and there are two different layers of insulation covering the copper strands for added protection and voltage. The 30 AWG bare copper strands are finely woven together into the different gauge sizes available. Anywhere from 8 AWG to 500 MCM, the amount of copper strands increases as the size of the cable increases, however the size of the strands remain 30 AWG throughout. There are also ground wires included in Type G. There is an insulated ground wire for every conductor and the ground wires are slightly smaller than the designated conductors. Therefore, Type G 8/4 has four 8 AWG conductors and 4 additional ground wires.

The first layer of insulation is called Ethylene Propylene Diene Monomer Rubber (EPDM) which is over the copper conductors, and the second layer is called Chlorinated Polyethylene (CPE) which covers all of the conductors. General Cable uses a special CPE blend called Super Vu-Tron®. Both insulation layers together rate this cable for up to 2000 volts in portable power supply applications. The insulation feels like rubber in your hands, so it’s very flexible as a single conductor portable cord product.

Type G 4 Conductor Cable Approvals

Type G cables need to be further approved due to the severity of applications they end up in. General Cable uses their branded Super Vu-Tron® mark of approval that no other manufacturer can use. However, the standard approvals for Type G are RoHS, UL, CSA, MSHA, 90°C, 2000 Volts, and resistant to sunlight, acids, alkalies, heat and flame. It also has excellent impact and abrasion resistance. It’s also approved as RHH/RHW for 600 volt applications, however Type W is known in the industry as a 2000 volt multiconductor cable due to the UL Type G recognition.

Type G 4 Conductor Cable Applications

Type G multiconductor portable cord is a step above SJOOW cable and SOOW cable because it is approved for higher voltage and more severe environmental conditions. For example, they are used outdoors where power is not permanently supplied such as an portable power systems, entertainment industry (theater, night clubs, television, motion pictures, mobile communication vans, spotlights and sounds systems), to supply power through generators.

SJOOW and SOOW cables are used at events, fairs and concerts, but Type G cables are used in industrial settings where more current is used to power large equipment and generators.

Type G 4 Conductor Cable Manufacturers

Several manufacturers make this 2000 volt cable but all design it in their own way. For example, specification sheets will vary in weight, outer diameter, total approvals and types of dual insulation. General Cable is the only manufacturer that can make Super Vu-Tron® cables. Southwire makes their 8 AWG with 168 strands of 30 AWG copper while General Cable makes their 8 AWG with 133 strands of 30 AWG copper. General Cable offers color upon request (minimum order) while most other manufacturers do not. Be sure to read the specification sheet of the manufacturer that you’re buying because it will absolutely make a difference depending on what exactly you’re looking for in your installation and application.

Type G 4 Conductor Prepared

WesBell is an ISO 9001 certified company that cuts multiconductor cord products, removes the outer jacket and strips the ends off. Many of our customers request this service so we have it simplified on or website during the checkout process. Simply choose the size of your cable, the length of the coil, and make notes as to any specific dimensions and strip lengths.

  • Construction
  • Bare copper
  • Premium grade EPDM insulation
  • CPE Jacket
  • Approvals
  • RoHS
  • MSHA
  • UL
  • CSA
  • 90°C
  • 2000 Volts
  • Resistance to oil and water
  • Withstands severe outdoor conditions and has high flexibility
  • Excellent abrasion resistance
  • O-zone and sunlight resistant
  • Applications
  • Industrial and light-to-medium duty mining
  • Heavy duty service as power supply cable
  • Mobile and portable electrical equipment